Tektronix PS280 - Equipment Required

Preparation
Equipment Required
The test equipment required for both the performance verification procedures
and the adjustment procedures for the Laboratory DC Power Supply are listed
Item Number and
Description
1 Adjustment Tool
2 Multimeter, Digital
3 Resistive Load, Vari-
4 Oscilloscope
Table 4-1: Test
Minimum Requirements
Less than % inch
diameter and over 2
inches long
35 V, 4 A, ±0.1%
Accuracy
0 to 2 n, 30 Watts
50 MHz, 3% vertical
deflection accuracy
Equipment
Example
Tektronix part number
003-0675-00
TEKTRONIX DM252
Tektronix part number
311-2494-00
TEKTRONIX 2225
Purpose
Adjustments
Adjustments
Adjustments
Performance Verification
5 Fixed Resistive
Loads Set
20 a, 30 Watts
10 a, 30 Watts
2 fl, 5 Watts
1 a, 30 Watts
7 a, 140 Watts
0.5 a, 5 Watts
15X1,70 Watts
30 a, 140 Watts
7.511,140 Watts
1.7 n, 20 Watts
30 a, 40 Watts
60 a, 70 Watts
Tektronix part number
118-8751-00
Performance Verification
6 Mechanical Switch 60 Watts
Tektronix part number
260-2570-00
Performance Verification
REV AUG 1991
Performance Verification