Performance Verification
Preparation 4-1
Requirements for Performance 4-1
Warm-up Period 4-1
Access 4-1
Test Equipment 4-1
Equipment Required 4-2
Performance Tests 4-3
Constant Current Load Regulation 4-3
Constant Current Ripple and Noise 4-5
Constant Voltage Regulation 4-7
Adjustment
Maintenance
Preparation 5-1
Requirements for Performance 5-1
Personnel 5-1
Warm-up Period 5-1
Access 5-1
Test Equipment 5-1
Adjustment Procedures 5-3
Independent Mode 5-3
Series Tracking Mode . «. 5-5
Parallel Tracking Mode 5-6
5 V Fixed 5-7
Information 6-1
Helpful Procedures 6-1
Preventing ESD 6-1
Inspection and Cleaning 6-5
General Care 6-5
Inspection and Cleaning Procedures 6-5
Inspect Exterior 6-5
Cleaning Procedure - Exterior 6-6
Inspect Interior 6-6
Cleaning Procedure — Interior 6-7
Lubrication 6-8
REV AUG
1991
Contents
To Next Page
Loading...
