Tektronix TDS1002 Programmer's Manual

Index
TDS200/1000/2000 Series Oscilloscope Programmer Manual
Index−5
M
Manual trigger, simulation with
command, 2-137
Math command group, 2-19
MATH?, 2-105
MATH:DEFINE, 2-106
MATH:FFT:HORIZONTAL:
POSITION, 2-108
MATH:FFT:HORIZON-
TAL:SCALE, 2-109
MATH:FFT:VERTICAL:POSI-
TION, 2-110
MATH:FFT:VERTICAL:SCALE,
2-111
MEAS<x>, command mnemonic,
2-9
Measurement command group,
2-20
Measurement commands
MEASUREMENT?, 2-111
MEASUREMENT:IMMED?,
2-112
MEASUREMENT:IMMED:
SOURCE1, 2-113
MEASUREMENT:IMMED:
TYPE, 2-113
MEASUREMENT:IMMED:
UNITS?, 2-115
MEASUREMENT:IMMED:
VALUE?, 2-115
MEASUREMENT:MEAS<x>?,
2-116
MEASUREMENT:MEAS<x>:
TYPE, 2-117
MEASUREMENT:MEAS<x>:
UNITS?, 2-119
MEASUREMENT:MEAS<x>:
VALUE?, 2-120
MEASUREMENT:MEAS<x>:
SOURCE, 2-117
Measurement specifier, command
mnemonic, 2-9
MEASUREMENT?, 2-111
MEASUREMENT:IMMED?,
2-112
MEASUREMENT:IMMED:
SOURCE1, 2-113
MEASUREMENT:IMMED:TYPE,
2-113
MEASUREMENT:IMMED:
UNITS?, 2-115
MEASUREMENT:IMMED:
VALUE?, 2-115
MEASUREMENT:MEAS<x>?,
2-116
MEASUREMENT:MEAS<x>:
TYPE, 2-117
MEASUREMENT:MEAS<x>:
UNITS?, 2-119
MEASUREMENT:MEAS<x>:
VALUE?, 2-120
MEASUREMENT:MEAS<x>:
SOURCE, 2-117
Message
command, 2-2
command terminator, 2-8
handling, 3-1
table of program messages, 3-17
Miscellaneous command group,
2-21
Miscellaneous commands
AUTOSET, 2-42
*DDT, 2-74
FACTORY, 2-86
HDR, 2-93
HEADER, 2-93
*IDN?, 2-103
LANGUAGE, 2-104
LOCK, 2-104
*LRN?, 2-105
REM, 2-125

Tektronix TDS1002 Specifications

General

Bandwidth	60 MHz
Channels	2
Sample Rate	1 GS/s
Record Length	2.5k points
Vertical Sensitivity	2 mV/div to 5 V/div
Vertical Resolution	8 bits
Display Resolution	320 x 240 pixels
Display	5.7 inch monochrome LCD
Trigger Modes	Video, Edge
Connectivity	USB 2.0
Weight	2.0 kg
Input Impedance	1 MΩ
Power Supply	100 to 240 VAC, 45 to 440 Hz