Tektronix TDS1002 Programmer's Manual

TDS200/1000/2000 Series Oscilloscope Programmer Manual
v
Preface
This programmer manual provides information on how to operate
your TDS 200-, TDS1000- or TDS2000-series digital oscilloscope
with the RS-232 or General Purpose Interface Bus (GPIB) protocols.
Related Documents
The TDS1000- and TDS2000-series oscilloscopes offer the following
standard and optional documents:
H For information on the general operation of the oscilloscopes and
how to use a TDS2CMA communications module with the
oscilloscope, refer to the TDS1000- and TDS2000-Series Digital
Storage Oscilloscope User Manual, a standard accessory
available in eleven languages as follows:
Language User manual part number
English 071−1064−XX
French 071−1065−XX*
Italian 071−1066−XX*
German 071−1067−XX*
Spanish 071−1068−XX*
Japanese 071−1069−XX*
Portuguese 071−1070−XX*
Simplified Chinese 071−1071−XX*
Traditional Chinese 071−1072−XX*
Korean 071−1073−XX*
Russian 071−1074−XX
* Contains a language overlay for the front−panel controls.

Tektronix TDS1002 Specifications

General

Bandwidth	60 MHz
Channels	2
Sample Rate	1 GS/s
Record Length	2.5k points
Vertical Sensitivity	2 mV/div to 5 V/div
Vertical Resolution	8 bits
Display Resolution	320 x 240 pixels
Display	5.7 inch monochrome LCD
Trigger Modes	Video, Edge
Connectivity	USB 2.0
Weight	2.0 kg
Input Impedance	1 MΩ
Power Supply	100 to 240 VAC, 45 to 440 Hz