Tektronix TDS1002 User Manual

TDS1000/2000-Series Digital Oscilloscope User Manual
173
Appendix C: General Care an d Cleaning
General Care
Do not store or leave the instrument where the LCD display will be
exposed to direct sunlight for long periods of time.
CAUTION. To avoid damage to the instrument or probes, do not
expose them to sprays, liquids, or solvents.
Cleaning
Inspect the instrument and probes as often as operating conditions
require. To clean the exterior surface, perform the following steps:
1. Remove loose dust on the outside of the instrument and probes
with a lint-free cloth. Use ca re t o avoid scratching the clear
plastic display filter.
2. Use a soft cloth dampened with water to clean the instrument.
Use an aqueous solution of 75% isopropyl alcohol for more
efficient cleaning.
CAUTION. To avoid damage to the surface of the instrument or
probes, do not use any abrasive or chemical cleaning agents.

Tektronix TDS1002 Specifications

General

Bandwidth	60 MHz
Channels	2
Sample Rate	1 GS/s
Record Length	2.5k points
Vertical Sensitivity	2 mV/div to 5 V/div
Vertical Resolution	8 bits
Display Resolution	320 x 240 pixels
Display	5.7 inch monochrome LCD
Trigger Modes	Video, Edge
Connectivity	USB 2.0
Weight	2.0 kg
Input Impedance	1 MΩ
Power Supply	100 to 240 VAC, 45 to 440 Hz