General Safety Summary
TDS3000 Series User Manual
vii
Preventing Electrostatic Damage
CAUTION. Electrostatic discharge (ESD) can damage components in
the oscilloscope and its accessories. To prevent ESD, observe these
precautions when directed to do so.
Use a Ground Strap. Wear a grounded antistatic wrist strap to
discharge the static voltage from your body while installing or
removing sensitive components.
Use a Safe Work Area. Do not use any devices capable of generating or
holding a static charge in the work area where you install or remove
sensitive components. Avoid handling sensitive components in areas
that have a floor or benchtop surface capable of generating a static
charge.
Handle Components Carefully. Do not slide sensitive components over
any surface. Do not touch exposed connector pins. Handle sensitive
components as little as possible.
Transport and Store Carefully. Transport and store sensitive components
in a static-protected bag or container.
Battery Recycling
This product may contain an optional Nickel Cadmium (NiCad)
battery, which must be recycled or disposed of properly. For the
location of a local battery recycler in the U.S. or Canada, please
contact:
RBRC (800) BATTERY
Rechargeable Battery Recycling Corp. (800) 227-7379
P.O. Box 141870 www.rbrc.com
Gainesville, Florida 32614
To Next Page
Loading...
Need help?
General
