Appendix C: Accessories
TDS3000 Series User Manual
C–3
Optional Accessories (Cont.)
TDS3VM VGA/RS-232 communication module
This communication module adds VGA and RS-232 ports to your
oscilloscope. You can attach a printer to the RS-232 port or use it
for remote programmability. You can attach a monitor to the VGA
port to enhance viewing the screen from a distance. Communica-
tion modules can be installed by the user and include the
TDS3000-Series Programmer Manual (in English only).
TDS3EM Ethernet communication module
This communication module adds Ethernet 10baseT and RS-232
ports to your oscilloscope. You can attach the oscilloscope to an
Ethernet network for remote printing. Communication modules
can be installed by the user and include the TDS3000-Series
Programmer Manual (in English only).
TDS3CHG external battery charger
The battery charger recharges the oscilloscope battery pack in
approximately 3 hours.
TDS3BAT rechargeable battery pack
An extra rechargeable battery pack provides a high-capacity
spare battery for extended portable operation.
To Next Page
Loading...
Need help?
General
