TEL AFA4000/E - Page 159

AFA4000/E VAV Airflow Controller / p.159
8.6.1 Accessing System Menus
To access the System Menus, press and hold the Enter button for approximately 5 seconds or
until the Main/Setup menu is displayed.
1. Navigate the Main/Setup menu using the ↑/↓ buttons, select the required menu and press
Enter.
2. Navigate the chosen menu using ↑/↓ buttons.
3. Select from the following System Menus:
• Keypad Tones
• Sash 1 Settings
• BMS Input Settings
• BMS Output Settings
4. Select menu entry and press Enter.
5. Select a menu entry value / parameter using ↑ / ↓ buttons to display the required
value/parameter, press Enter.
6. Press Cancel to exit the menu entry and return to the menu.
7. To return to the Main / Setup menu use ↑ / ↓ buttons and select Back to Setup Menu, press
Enter.
8. Using ↑/↓ buttons select one of:
• Exit and Abandon Changes
• Exit and Save Changes