TEL AFA4000/E - Page 160

AFA4000/E VAV Airflow Controller / p.160
8.6.2 Navigating the system menus
8.6.2.1 Keypad tones
Menu item
Option
Instructions
Keypad tones
Enable or disable the keypad sounding
when a key is pressed.
8.6.2.2 Sash 1 settings menu
Menu item
Option
Instructions
Sash 1 settings
Enabled
Choose the setting to permanently
enable/disable the Auto Sash Controller
motor drive:
• No to disable the drive.
• Yes to enable the drive.
Sensors
Tilt Switch
Set the input activation for the tilt switch:
• Normally Open (N/O) Contact
• Normally Closed (N/C) Contact
Disabled
Light Curtain
Enable or disable the Light Curtain:
• Normally Open (N/O) Contact
• Normally Closed (N/C) Contact
Disable
Light Curtain Test
Enable or disable Light Curtain Test:
• Pulse High
• Pulse Low
Off
Auto Clear Obstruction
Alarm
Enable or disable Auto Clear Obstruction
Alarm:
• Yes
• No