TEL AFA4000/E - Page 162

AFA4000/E VAV Airflow Controller / p.162
Menu item
Option
Instructions
Motor Drive (cont.)
Motor Current Display
Set the required current display:
• Live
• Max
Off
Motor Current 0-10V
Set the required output:
• Sash 1
• Sash 2
Off
Calibration
Calibrates sash position sensor and motor
direction. See section 7.4.2
Auto Close
Enable / Disable
Set the required action:
• Enable
• Disable
Auto Close Delay
Set the delay time:
1-3600 Seconds
Auto Close Alarm
Set the delay time:
0-10 Seconds
Tiptronic
Enable / Disable
Set the required action:
• Enable
• Disable
Min Tiptime
Set the min tip time:
100-300msec
Max Tiptime
Set the max tip time:
500-1500msec
Auto Open
Enable / Disable
Set the required action:
• Enable
• Disable