Teldat bintec RT1202 User Manual

RADIUS packets
The following types of packets are sent between the RADIUS server and your device
(client):
Packet types
Field Value
ACCESS_REQUEST Client -> Server
If an access request is received by your device, a request is
sent to the RADIUS server if no corresponding connection part-
ner has been found on your device.
ACCESS_ACCEPT Server -> Client
If the RADIUS server has authenticated the information con-
tained in the ACCESS_REQUEST, it sends an AC-
CESS_ACCEPT to your device together with the parameters
used for setting up the connection.
ACCESS_REJECT Server -> Client
If the information contained in the ACCESS_REQUEST does
not correspond to the information in the user database of the
RADIUS server, it sends an ACCESS_REJECT to reject the
connection.
ACCOUNTING_START Client -> Server
If a RADIUS server is used for accounting, your device sends
an accounting message to the RADIUS server at the start of
each connection.
ACCOUNTING_STOP Client -> Server
If a RADIUS server is used for accounting, your device sends
an accounting message to the RADIUS server at the end of
each connection.
A list of all entered RADIUS servers is displayed in the System Management->Remote
Authentication->RADIUS menu.
Teldat GmbH
10 System Management
bintec Rxxx2/RTxxx2 97

Teldat bintec RT1202 Specifications

General

Brand	Teldat
Model	bintec RT1202
Category	Gateway
Language	English