You can use the ISDN BRI interface of your gateway for both dialup connections and
leased lines over ISDN.
Fig. 51: Physical Interfaces->ISDN Ports->ISDN Configuration->
The Physical Interfaces->ISDN Ports->ISDN Configuration-> menu consists of the
following fields:
Fields in the Basic Parameters menu.
Field Description
Port Name Shows the name of the ISDN port.
Autoconfiguration on
Bootup
Select whether the ISDN switch type (D channel detection for
switched line) is to be automatically identified.
The function is enabled with ,.
The function is enabled by default.
Result of Autoconfig-
uration
Shows the status of the ISDN Auto Config.
Automatic D-channel detection runs until a setting is found, or
until the ISDN protocol is selected manually under Port Usage.
This field cannot be edited. The result of automatic configuration
for the Port Usage and the ISDN Configuration Type is dis-
played.
Possible values:
• All possible values for the Port Usage and the ISDN Config-
11 Physical Interfaces Teldat GmbH
126 bintec Rxxx2/RTxxx2
To Next Page
Loading...
Need help?
General
