Field Description
uration Type.
• @3 : Detection is still running.
Port Usage Only if Autoconfiguration on Bootup is disabled.
Select the protocol that you want to use for the ISDN port.
Possible values:
• ' 3#: The ISDN connection is not used.
• .,3) 3 *.'
• /# /
• D*
ISDN Configuration
Type
Only if Autoconfiguration on Bootup is disabled and for Port
Usage = .,3) 3 *.' or D*
Select the ISDN connection type.
Possible values:
• %3,) (default value): Point-to-multipoint
connection
• : Point-to-point ISDN access.
ISDN Switch Type Only for Port Usage = /# /
Select the ISDN protocol supplied by your provider.
Possible values:
• /# / = *: Leased line over B channel 1 (64
kbps)
• /# / =;= *: Leased line over both B chan-
nels (128 kbps)
• /# / .;=;= (*: Leased line over D-channel
and both B channels (144 kbps)
• /# / =;= .!! )#: Leased
line to two different endpoints.
• /# / =;. (*: Leased line over B channel 1
and D-channel (80 kbps)
• /# / =;. (*: Leased line over B channel 2
and D-channel (80 kbps)
Teldat GmbH
11 Physical Interfaces
bintec Rxxx2/RTxxx2 127
To Next Page
Loading...