that the device uses the desired current time, you should configure one or more time serv-
ers. Switching from summer time to winter time (and back) must be carried out manually if
the time is derived using this method by changing the value in the Time Zone field with an
option UTC+ or UTC-.
Note
If a method for automatically deriving the time is defined on the device, the values ob-
tained in this way automatically have higher priority. A manually entered system time is
therefore overwritten.
The menu System Management->Global Settings->Date and Time consists of the fol-
lowing fields:
Fields in the Basic Settings menu.
Field Description
Time Zone Select the time zone in which your device is installed.
You can select Universal Time Coordinated (UTC) plus or
minus the deviation in hours or a predefined location, e.g.
3)5=,.
Current Local Time The current date and current system time are shown here. The
entry cannot be changed.
Fields in the Manual Time Settings menu.
Field Description
Set Date Enter a new date.
Format:
• Day: dd
• Month: mm
• Year: yyyy
Set Time Enter a new time.
Format:
• Hour: hh
• Minute: mm
Teldat GmbH
10 System Management
bintec Rxxx2/RTxxx2 79
To Next Page
Loading...
Need help?
General
