Fields in the Automatic Time Settings (Time Protocol) menu.
Field Description
ISDN Timeserver Only for devices with ISDN interface.
Determine whether the system time is to be updated via ISDN.
If a time server is configured, the time is only determined over
ISDN until a successful update is received from this time server.
Updating over ISDN is deactivated for the period in which the
time is determined by means of a time server.
The function is activated with ,.
The function is disabled by default.
First Timeserver Enter the primary time server, by using either a domain name or
an IP address.
In addition, select the protocol for the time server request.
Possible values:
• *'( (default value): This server uses the simple network
time protocol via UDP port 123.
• ( *" 5 0.: This server uses the Time service
with UDP port 37.
• ( *" 5 (2: This server uses the Time service
with TCP port 37.
• ': This time server is not currently used for the time re-
quest.
Second Timeserver Enter the secondary time server, by using either a domain name
or an IP address.
In addition, select the protocol for the time server request.
Possible values:
• *'( (default value): This server uses the simple network
time protocol via UDP port 123.
• ( *" 5 0.: This server uses the Time service
with UDP port 37.
• ( *" 5 (2: This server uses the Time service
with TCP port 37.
10 System Management Teldat GmbH
80 bintec Rxxx2/RTxxx2
To Next Page
Loading...
Need help?
General
