R309 AT Commands
©2015 Telegesis (UK) Ltd - 66 - AT Command Manual (Rev 3.09)
91 Operation only possible if connected to a PAN
93 Node is not part of a Network
94 Cannot join network
96 Mobile End Device Move to new Parent Failed
98 Cannot join ZigBee 2006 Network as Router
A1 More than 8 broadcasts were sent within 8 seconds
AB Trying to join, but no beacons could be heard
AC Network key was sent in the clear when trying to join secured
AD Did not receive Network Key
AE No Link Key received
AF Preconfigured Key Required
C5 NWK Already Present
C7 NWK Table Full
C8 NWK Unknown Device
Bootloader error codes
18 Transfer aborted prematurely
1B Start of data transfer timed out
1C Data transfer timed out
44 Unknown tag detected in .EBL image (wrong file format?)
45 Invalid .EBL header signature (wrong file type for chip?)
4E An invalid length was detected in the .EBL image (corrupt file?)
To Next Page
Loading...