Telegesis ETRX357-LR - Parameters

R309 AT Commands
©2015 Telegesis (UK) Ltd - 8 - AT Command Manual (Rev 3.09)
2.1 Parameters
Each parameter must be entered in the correct format for any of the AT commands to execute
correctly. Optional parameters are marked with square brackets […].
XX
8-bit hexadecimal number. Valid characters are 0-9, a-f and A-F
XXXX
16-bit hexadecimal number. Valid characters are 0-9, a-f and A-F
n
Number from 0-9
s
Sign
b
Bit (0 or 1)
c
character
<PID>
16-bit hexadecimal PAN ID (0000 to FFFF)
<EPID>
64-bit hexadecimal extended PAN ID
<channel>
decimal channel (802.15.4 channel 11-26)
<password>
8 character password
<EUI64>
64-bit IEEE 802.15.4 address in hexadecimal
<ioread>
32-bit hexadecimal number representing the reading of S1A
<data>
Custom Data
<ClusterList>
A list of 16 bit cluster identifiers in hexadecimal representation
<FirmwareRevision>
The Firmware Revision Number
Table 2: Different formats of parameters