Telegesis ETRX357-LR - 4.6 Advanced Settings

R309 AT Commands
©2015 Telegesis (UK) Ltd - 104 - AT Command Manual (Rev 3.09)
4.6 Advanced Settings
S3E – Multicast Table Entry 00
Description
The ID portion of Multicast Table Entry 00
Operations
R/W LOCAL
R/W REMOTE
Becomes effective
Instantly
Note
Same effect as AT+MSET, but can be set at
boot-up by built-in functionality
Storage
Non-Volatile
Parameters
XXXX
If S3E is not set to all 0’s multicast table entry 00
to endpoint 1 (the AT command layer’s
endpoint) is set with the setting of this register is
created instantly and after a reset.
Factory Default
0000
SW release
R300 ●
S3F – Multicast Table Entry 01
Description
The ID portion of Multicast Table Entry 01
Operations
R/W LOCAL
R/W REMOTE
Becomes effective
Instantly
Note
As for S3E
Storage
Non-Volatile
Parameters
XXXX
If S3F is not set to all 0’s multicast table entry 01
to endpoint 1 (the AT command layer’s
endpoint) is set with the setting of this register is
created instantly and after a reset.
Factory Default
0000
SW release
R300 ●