Telegesis ETRX357-LR - Page 105

R309 AT Commands
©2015 Telegesis (UK) Ltd - 105 - AT Command Manual (Rev 3.09)
S40 – Source and Destination Endpoints for xCASTs (volatile)
Description
The source and destination endpoints for all
messages.
Operations
R/W LOCAL
R/W REMOTE
Becomes effective
Instantly
Storage
Volatile
Parameters
ssdd
Where ss is the hexadecimal source endpoint
and dd is the hexadecimal destination endpoint.
Factory Default
Defined in S41
SW release
R300 ●
S41 – Initial Setting of S40
Description
The initial setting of S40 stored in non volatile
memory
Operations
R/W LOCAL
R/W REMOTE
Becomes effective
After Soft or Hard Reset
Storage
Non-Volatile
Parameters
ssdd
Where ss is the hexadecimal source endpoint
and dd is the hexadecimal destination endpoint.
Factory Default
0101
SW release
R300 ●