Telegesis ETRX357-LR - Page 106

R309 AT Commands
©2015 Telegesis (UK) Ltd - 106 - AT Command Manual (Rev 3.09)
S42 – Cluster ID for xCASTs (volatile)
Description
The Cluster ID attached to any xCAST
message.
Operations
R/W LOCAL
R/W REMOTE
Becomes effective
Instantly
Storage
Volatile
Parameters
XXXX
The cluster ID of any xCAST message
Factory Default
Defined in S43
SW release
R300 ●
S43 – Initial Setting of S42
Description
The initial setting of S42 stored in non volatile
memory
Operations
R/W LOCAL
R/W REMOTE
Becomes effective
After Soft or Hard Reset
Storage
Non-Volatile
Parameters
XXXX
The cluster ID of any xCAST message
Factory Default
0002
SW release
R300 ●