Telegesis ETRX357-LR - Page 93

R309 AT Commands
©2015 Telegesis (UK) Ltd - 93 - AT Command Manual (Rev 3.09)
S27 – Functionality at Bootup
Description
Describes the immediate action taken after boot-
up (and stack initialization).
Operations
R/W LOCAL
R/W REMOTE
Becomes effective
Instantly
Note
On versions before R305 this was executed
before the protocol stack was running so it could
not be used for network or message functions
Storage
Non-Volatile
Parameters
XXXX
If set to 0 the functionality is disabled. Please
see section 5 for a list of available
functionalities.
Factory Default
0000 (none)
SW release
R305 ●
S28 – Functionality at Network Join
Description
Describes the immediate action taken after
joining a network.
Operations
R/W LOCAL
R/W REMOTE
Becomes effective
Instantly
Storage
Non-Volatile
Parameters
XXXX
If set to 0 the functionality is disabled. Please
see section 5 for a list of available
functionalities.
Factory Default
0000 (none)
SW release
R302 ●