Teleste MCC201 - Page 34

30 • 4. Remote Configuration
MCC201/MCC201H User manual
Port
 Base Port (1025 ~ 65535)
Enter the Base Port number.
Network base port is use for communication with remote clients. In order for camera and remote systems
(decoder or VMS, NVR software) to be connected, the port number must be identically configured in
camera side and client side.
 HTTP Port (80, 1025 ~ 65535)
Enter HTTP port used for web-based connection.
 HTTPS Port (443, 1025 ~ 65535)
Enter HTTPS port used for secured HTTP connection.
 RTSP Port (554, 1025 ~ 65535)
Enter RTSP port used for RTSP-based connection. The default RTSP port is 554.
RTSP (Real Time Streaming Protocol) is a standard for media streaming between server and client.
Discovery
 UPNP
By setting UPNP to ON, it allows the discovery by the client according to UPNP (Universal Plug and Play)
protocol.
 Zeroconf
By setting Zeroconf to ON, it allows the discovery by the client according to Zeroconf protocol.
 WS Discovery
Discovery function based on web service is enabled. It allows the discovery by Client SW which is
supporting Onvif.
Authentication
 RTSP Authentication
If RTSP Authentication set to ON, user in the client side is asked to enter User ID and Password.
 HTTP API Authentication
When HTTP API authentication set to ON, HTTP Authentication is asked for all clients
which use HTTP API.