Televes H30+ - Speed Test Utility

EN
19
Level of the
selected
frequency
Yellow mark:
indicates
the selected
frequency in
the spectrum
Red line:
indicates
the current
maximun
level
Red graph:
max-hold
Orange graph:
real-time
Green graph:
min-hold
Selected frequency
Change using
9.2. Setup
Press
to change Ingress Scan options.
- Ingress frequencies: 5-42 MHz, 5-66 MHz,
5-86 MHz, 5-206 MHz.
Select the span of the graph.
- Ref. Level: Select the reference level of the
bar graph
- Reset Data: Delete the max-hold and min-
hold graph
10. Speed Test
Allows you to check your basic network
performance parameters so you don’t need to get
your laptop out.
This function attempts to connect to the server
(the server is selected automatically by the H30+/
D+/D+Adv by location), checks the DHCP protocol
and the connection to the Internet.
If it is all right, the H30+/D+/D+Adv makes a ping
to the server and shows the delay times.
Finally, the H30+/D+/D+Adv makes a download
and upload speed test.
To start a new test, press OK button.
10.1. Main window
Below is a capture of a Speed Test window with a
brief explanation of its features:
Download and
upload speed
Server
name
Ping
delay
Link
check
Public IP ISP
DHCP
check
IP
Internet
check