Televes H30+ User Manual

EN
23
14. Setup
Change main conguration settings:
- Ter. Network: Aerial, Cable.
- Cable Standard: J.83-B / A.
- Ter. Plan: Selected Terrestrial plan.
- Language: English, Español.
- Units: dBµV, dBmV, dBm
- Quality proles: Trunk, Tap, End Line,
Ground.
Dierent thresholds are available for dierent
testing locations.
- Analog Standard: Selects the standard
for the analog channels and changes
automatically the audio carrier to a value
according to the selected standard.
- Audio Carrier: 4.5 MHz, 5.5 MHz, 6.0 MHz,
6.5 MHz.
- Volume
- Network:
Setup: Manual, Auto.
When Setup Manual is selected, the user
must set the IP, gateway and DNS.
Gateway
IP
DNS
- Wi-Fi : Allows to connect the H30+/D+/
D+Adv to a Wi-Fi network.
Wi-Fi: On, O
Scan: When Wi-Fi is turned on, shows a
list of all the found Wi-Fi networks.
As you can see in the image above, the list
shows the name of the Wi-Fi networks and
indicates if the network is open or restricted,
as well as the protection access type.
To access to a restricted network, you must
enter the password using and
To verify the password, nd a red square
behind the last character of the password
and press
If you connect a mobile device (such as a
mobile phone, tablet, etc.) and your H30+/
D+/D+Adv to the same Wi-Fi network,
you can use your mobile device to control
your H30+/D+/D+Adv. You just have
to download the H30+/D+/D+Adv app
(available for IOS and Android)
MAC: The MAC can be set automatically
or user-selected
Setup: Auto, Manual
MAC: When Setup Manual is selected,
the user must enter the MAC using
navigation buttons and
SSID: Shows the SSID of the H30+/D+/
D+Adv
BSSID: Shows the SSID of the H30+/D+/
D+Adv
IP: Shows the SSID of the H30+/D+/
D+Adv
-Units System: Metric, Imperial
- Time and Date:
Set current time (hour and minutes) and
date (day of the month, month and year).
- Energy:
Auto suspension
Auto shutdown
- Update rmware: ON, OFF
When ON, every time the H30+/D+/
D+Adv is connected to the internet, it will
allow the user to update the rmware if a
new version is available.
- Reset conguration: Resets the meter to
factory settings.
- Licenses: Shows the options included in you
H30+/D+/D+Adv
- About SW: Shows the rmware version
- About HW: Shows the product reference
number, serial number and IP address.
15. IPTV (H30D+Adv.)
This menu provides the necessary measurements
and parameters to guarantee a correct reception of
IPTV services.
12.1. IPTV functions
To achieve this, this menu has three functions:

Televes H30+ Specifications

General

Input Impedance	75 Ω
Power Supply	100-240 V AC, 50/60 Hz
Display	2.8-inch color LCD
Battery	Li-Ion
Connectors	F-type
Measurements	MER, BER, C/N
Battery Life	4 hours