Televes H30+ - Firmware Update

EN
25
8.2. Setup
Press
to change Echoes options.
- Powering: O, 13V, 18V, 24V.
- Tuning: Channel, Frequency
- Units: us, km
Firmware Update
Whenever your H30+/D+/D+Adv is connected to
the internet, it will automatically check if there is a
newer rmware version. If it is so, an arrow icon will
appear at the top of the screen:
If the user wants to update the rmware, please
select function Update rmware in the Setup menu
If there is a new rmware version, a message will
be displayed when the user selects this function:
The icon with the arrows indicates
that there is a new rmware
version
Press OK button to automatically download and
install the new rmware version.
Web Application
First of all, connect your H30+/D+/D+Adv to the
network using the Ethernet connector or the Wi-
Fi interface. Then you must nd out the IP of your
H30+ (see section 14.- Setup - Network/Wi-Fi).
Then, type your H30+/D+/D+Adv IP in the address
bar of your web browser and press Enter.
Then you can see the home window of the H30+/
D+/D+Adv web application:
1. Measurements
In this window, you can see all the datalogs saved
in your H30+/D+/D+Adv. They are grouped by date
in a calendar:
H30+ info
Menu bar
Month/week/
day view
Change calendar/
list display mode