H30+ H30D+ - CATV & DOCSIS 3.1 Meter /Analyzer
24
12.1.1. Measurements
This function shows all the necessary
measurements of the selected IPTV channel.
12.1.1.1. Main Window
Below is a capture of a IPTV Measurements window
with a brief explanation of its feature:
12.1.1.2. Setup
Press
to change IPTV Measurements
options.
- Channels: Allows to change the selected
IPTV channel.
List of measurements
Selected channel data
Selected channel
- Save Datalog: Saves the current IPTV
measurements. You can see the datalogs
using the remote control application.
16. Echoes (H30D+Adv.)
It is important to check that no echoes can cause
problems in the reception of DVBT / T2 signals.
This feature you allows to visualize the echoes
of the received signal, helping the installer to
minimize them as much as possible for optimal
signal reception.
In addition to the echoes graph, this function
shows the channel power and MER measurements,
as well as the FFT mode, the guard interval, and the
Cell ID.
9.1. Main window
Below is a capture of a Ecos window with a brief
explanation of its features:
List of measurements with
pass/fail indicators
and number of echoes
Selected channel
Change using
Echoes graph
To Next Page
Loading...
