To Next Page

To Previous Page

User manual

“SCART DVB-T 7117

”

11.3.4.- Time Configuration

Using this menu, you can configure the way in which the receiver manages

the Time information it receives with the signal.

Timer Mode

Using buttons CH+ / CH- locate the cursor on parameter “Timer

Mode” and using buttons / select the time setting: Automatic or

Manual.

Selecting the Automatic mode will enable you to change the parameters

“GMT Offset” and “Summer Time”.

Selecting the Manual mode will enable you to edit the values

corresponding to “Date” and “Time”.

Date

Using buttons CH+ / CH- locate the cursor on parameter “Date”.

Using buttons / you enable an emerging calendar where the date can

be updated.

Using buttons CH+ / CH- y / select the day on the calendar. If you

select a day which is outside the current month, it will change to the

previous or next month.

Using the red and yellow buttons, select the month.

With the blue and green buttons select the year.

Time

Using buttons CH+ / CH- locate the cursor on parameter “Time”.

Using buttons / the digits corresponding to the hour and minute

values are selected. Using the numerical keyboard enter the correct value

for each digit.

GMT Offset

Using this option, you will be able to indicate the time shift of the

equipment location relative to GMT.

To do so, using buttons CH+ / CH- locate the cursor on parameter

GMT Adjustment. With buttons / switch to the values list and using

buttons CH+ / CH- select the shift desired. Press OK to accept.

Summer Time

This option allows you to enable or disable the summer time function.

For the purpose, using the buttons CH+ / CH- locate the cursor on

parameter “Summer Time” and using buttons / enable (on) or disable

(off) this option.

Finally, press button OK to confirm the change in parameters.

Televes SCART DVB-T 7117 User Manual

Questions and Answers: