Telit Wireless Solutions ME910C1-WW - Page 25






AT Commands Reference Guide
80529ST10815A Rev.2– 2017-09-14

ReproductionforbiddenwithoutTelitCommunicationsS.p.A.writtenauthorization‐AllRightsReserved  page25of233

+WS46 , +COPS, +CPLS, +CGDCONT, +CEMODE, #ALARMPIN, #CCLKMODE, +CALA, #SCFGEXT, #SCFGEXT2,
#SCFGEXT3, #SSLEN, #DNS, #HTTPCFG, $GPSGLO, $SLP, $SLPTYPE, $SUPLSEC, $SLPTYPE, $LICLS, $SUPLV,
$SUPLSEC, #BND, #SCFG, #TEMPMON, #EPASSW
The values set by following commands are stored in NVM on demand, issuing specific commands and
independently from the profile:
+CSCA, +CSMP
Stored by +CSAS
3
command and restored by +CRES
4
command.
.

3
Bothcommands+CSASand+CRESdealwithnon‐volatilememory,intendingforiteithertheNVMandtheSIMstorage.