Telit Wireless Solutions ME910C1-WW - Antenna Installation Guidelines






AT Commands Reference Guide
80529ST10815A Rev.2– 2017-09-14

ReproductionforbiddenwithoutTelitCommunicationsS.p.A.writtenauthorization‐AllRightsReserved  page75of233

+CPMS - Preferred Message Storage
Where: <memr>, <memw> and <mems> are the selected storage memories for
readin
g
, writin
g
and storin
g
respectivel
y
.
AT+CPMS=?
Test command reports the supported values for parameters <memr>, <memw> and
<mems>
Example
AT+CPMS?
+CPMS: "ME",27, 50,"ME",27, 50,"SR",1,20
OK
AT+CPMS="SM","ME","SM"
+CPMS: 1,20,27, 50,1,20
OK
AT+CPMS?
+CPMS: "SM",1,20,"ME",27, 50,"SM",1,20
OK
(You have 1 out of 255 SMS SIM positions occupied)
Reference
3GPP TS 27.005
Message Format - +CMGF
+CMGF - Message Format
AT+CMGF=
[<mode>]
Set command selects the format of messages used with send, list, read and write
commands.
Parameter:
<mode>
0 - PDU mode, as defined in 3GPP TS 3.40/23.040 and
3GPP TS 3.41/23.041 (factory default)
1 - text mode
AT+CMGF?
Read command reports the current value of the parameter <mode>.
AT+CMGF=?
Test command reports the supported value of <mode> parameter.
Example
AT+CMGF=1
OK
Reference
3GPP TS 27.005
Message Configuration
Service Center Address - +CSCA