Telit Wireless Solutions ME910C1-WW - Number of Rings to Auto Answer - S0






AT Commands Reference Guide
80529ST10815A Rev.2– 2017-09-14

ReproductionforbiddenwithoutTelitCommunicationsS.p.A.writtenauthorization‐AllRightsReserved  page38of233

Number of Rings to Auto Answer - S0
S0 - Number Of Rin
g
s To Auto Answer
ATS0=[<n>]
Set command sets the number of rings required before device automatically answers
an incoming call.
Parameter:
<n> - number of rings
0 - auto answer disabled (factory default)
1..255 - number of rin
g
s required before automatic answer.
ATS0?
Read command returns the current value of S0 parameter.
Reference
V25ter