Telit Wireless Solutions ME910G1 Hw Design Guide

ME910G1 HW Design Guide
1VV0301593 Rev.7 Page 10 of 98 2021-02-02
2. GENERAL PRODUCT DESCRIPTION
Overview
The ME910G1 module is a CATM/ NBIoT communication product which allows integrators
to plan on availability for even the longest lifecycle applications, highly recommended for
new designs specified for worldwide coverage.
The ME910G1-WWV product is fully voice capable, the digital audio interface make it
suitable for applications such as voice enabled alarm panels, mHealth patient monitors
and specialty phones such as those for the elderly or sensory-impaired.
The ME910G1 operates with 1.8 V GPIOs, minimizing power consumption and making it
even more ideal for application with battery powered and wearable device.
Product Variants and Frequency Bands
Product
2G Band
(MHz)
LTE CATM1
NBIoT
CS Voice
VoLTE
Region
ME910G1-W1
-
B1, B2, B3, B4, B5,
B8, B12, B13, B18,
B19, B20, B25, B26,
B27, B28, B66, B85
B1, B2, B3, B4, B5,
B8, B12, B13, B18,
B19, B20, B25, B26,
B28, B66, B71, B85,
B86*
N Worldwide
ME910G1-WW
850, 900,
1800, 1900
B1, B2, B3, B4, B5,
B8, B12, B13, B18,
B19, B20, B25, B26,
B27, B28, B66, B85
B1, B2, B3, B4, B5,
B8, B12, B13, B18,
B19, B20, B25, B26,
B28, B66, B71, B85
N Worldwide
ME910G1-WWV
850, 900,
1800, 1900
B1, B2, B3, B4, B5,
B8, B12, B13, B18,
B19, B20, B25, B26,
B27, B28, B66, B85
- Y Worldwide
Table 2: Product Variants and Frequency Bands * See note below
Refer to “RF Section” for details information about frequencies and bands.
Note:
Cellular technologies and frequency bands that are enabled
may vary based on
firmware version and firmware configuration
used.

Telit Wireless Solutions ME910G1 Specifications

General

Brand	Telit Wireless Solutions
Model	ME910G1
Category	Wireless modules
Language	English