ME910G1 HW Design Guide
1VV0301593 Rev.7 Page 11 of 98 2021-02-02
“B86” is not a 3GPP band, it means the following:
UL range: 787-788 MHz, DL range: 757-758 MHz
that is available only in module where AT#BNDOPTIONS command
contains the string B86. i.e.
AT#BNDOPTIONS?
#BNDOPTIONS: 1,2,3,4,5,8,12,13,18,19,20,25,26,27,28,66,71,85,86
Target Market
ME910G1 can be used for telematics applications where tamper-resistance,
confidentiality, integrity, and authenticity of end-user information are required, for
example:
• Telematics services
• Road pricing
• Pay-as-you-drive insurance
• Stolen vehicles tracking
• Internet connectivity
Main features
• CATM and NBIoT technologies
• SMS support (text and PDU)
• Alarm management
• USB 2.0 HS (AT command
, FW upgrade and module diagnostic)
• USIF0 Main UART (AT command
1
and FW upgrade)
• USIF1 Auxiliary UART (AT Command
1
, AppZone diagnostic)
• 10 GPIOs
Table 3: Functional features
1
Functionality depending on ports configuration
To Next Page
Loading...
Need help?
General
