ME910G1 HW Design Guide
1VV0301593 Rev.7 Page 77 of 98 2021-02-02
11. PACKAGING
Tray
The ME910 modules are packaged on trays that can be used in SMT processes for pick &
place handling.The first Marketing and Engineering samples of the ME910G1 series will
be shipped with the current packaging of the xE910 modules (on trays of 20 pieces each).
Please note that Telit is going to introduce a new packaging for the xE910 family, as per
the Product Change Notification PCN-0000-14-0055, therefore the mass production units
of ME910G1 will be shipped according to the following drawings:
Figure 31: Tray packaging
To Next Page
Loading...
Need help?
General
