Telit Wireless Solutions SL869-V2 Series - 19. DOCUMENT HISTORY

SL869x-V2 Family Product User Guide
1VV0301175 Rev. 9 Page 91 of 93 2021-07-15
Not Subject to NDA
19. DOCUMENT HISTORY
Revision
Date
Changes
9
2021-07-15
Modified section 9.4.3 to document features supported via I2C port.
Updated document to new Telit standard template.
8
2019-08-23
Corrected RF_IN pin descriptions (SAW vs. LNA inputs)
7
2018-12-21
Removed incorrect description of Ant_OC and ANT_SC_N for the
SL869-V2.
Changed minimum Vcc and Vbatt from 2.8 to 3.0 V.
Added Schottky diodes to the block diagrams
6
2018-08-10
Removed prohibition against driving RESET_N high.
Updated performance numbers.
Minor formatting changes.
5
2018-07-13
Updated photos and packaging information
Added “Always Locate” is not included on the MT3337E ROM.
SBAS ranging is not supported
I/O 2nd port description updated
Removed restriction prohibiting fast-discharge LDO
Minor text revisions
4
2018-03-12
Changed Vcc limits to 2.8 - 4.3 (testing completed)
Changed QZSS default to “disabled”
Added RTCM Version & Message types
Removed restriction of RTCM data over I2C
Updated Vcc voltage range
Added diagrams: EASY, Jamming, GLP, Periodic, Always Loc
Added power management command summary table
Added configuration command references
Added 1PPS information
Rearranged Serial Port information
Changed MT3333-based 2nd port default configuration to I2C
Rearranged Product Features table(s)
Deleted incorrect references to Force-On and Perpetual Backup
Corrected commands for Backup and Standby modes
Corrected commands for Periodic Low Power modes
Added information on the new GLP low-power mode
Corrected checksum on the $PMTK161,1 command