WE310G4-I/P Module Hardware User Guide
1VV0301767 Rev. 5 Page 6 of 48 2022-11-08
Not Subject to NDA
1.
INTRODUCTION
Scope
This document describes electrical specifications, mechanical information, interface
application, and manufacturing information about the Telit WE310G4-I/P Wi-Fi/BLE
module. With the help of this document and other application notes or user guides, users
can understand the Telit WE310G4-I/P Wi-Fi/BLE module well and develop various
products quickly.
Audience
This document is intended for Telit customers, especially system integrators, about to
implement their applications using the Telit module.
Contact Information, Support
For general contact, technical support services, technical questions and report
documentation errors contact Telit Technical Support at:
TS-EMEA@telit.com
TS-AMERICAS@telit.com
TS-APAC@telit.com
TS-SRD@telit.com
Alternatively, use
https://www.telit.com/contact-us
.
For detailed information about where you can buy the Telit modules or for
recommendations on accessories and components, visit
https://www.telit.com
.
We aim to make this guide as helpful as possible. Keep us informed of your comments
and suggestions for improvements.
Telit appreciates feedback from the users of our information.
Symbol Convention
Danger: This information MUST be followed, or catastrophic equipment
failure or personal injury may occur.
Warning: Alerts the user on important steps about the module integration.
Note/Tip: Provides advice and suggestions that may be useful when
integrating the module.
Electrostatic Discharge: Notifies the user to take proper grounding
precautions before handling the product.
All dates are in ISO 8601 format, that is. YYYY-MM-DD.
To Next Page
