TP-8/16/24/32/64S User Manual Version No.: V1.2
- 68 -
function; and “disable” means to close it.
T38 control mode setting command
codec_ep1> t38_mode {parameter}
The parameter is only “mgc” or “mg”. Therein, “mgc” means T38 mode is controlled by mgc; and
“mg” means T38 mode is controlled by mg.
T38 port setting command
codec_ep1> t38_port
The command is set by mode of interaction, it does not need any parameter. After carrying out a
command, CLI will show the value range of port is 1 ~ 65535, and show the port number of Endpoint
1, input new port number after Endpoint1. For example:
Port range: 1 ~ 65535
Endpoint1 [14000]: 10000
During the setting, users button the enter key to keep the original port setting, and press “Ctrl ＋ C”
to cancel it.
Ring style setting command
codec_ep1> tone {parameter}
The parameter is only “0”, 1” or “2”, which stands for different ring styles.
Command for progress tone duration time setting codec_ep1> tone_duration
The command is set by mode of interaction, it does not need any parameter. The set parameters
include:
Dial Tone Duration
Busy Tone Duration
Howler Tone Duration
Digit max interval
Ringback Tone Duration
Ring Max Time
Call Waiting Time
Confirm Tone Duration
Such as:
Dial Tone Duration (1 ~ 254), [60]:
Busy Tone Duration (1 ~ 254), [60]:
Howler Tone Duration (1 ~ 254), [60]:
Digit Max Interval (10 ~ 60), [25]:
Ringback Tone Duration (1 ~ 254), [60]:
Ring Max Time (1 ~ 254), [60]:
Call Waiting Time (1 ~ 30), [30]:
Confirm Tone Duration (1 ~ 254), [0]:
Therein, the numbers in “[ ]” means the value set for the parameter currently, unit is second.
To Next Page