EasyManuals Logo

Teltronics Arcata 2826 CIP-D User Manual

Teltronics Arcata 2826 CIP-D
118 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #101 background imageLoading...
Page #101 background image
28xx CIP-D User Guide 79
Daisy-chaining IP phones
- Do not connect an IP phone to
another IP phone through the
access port. Each IP phone should
directly connect to a switch port.
If you connect IP phones together in
a line (daisy-chaining), a problem
with one phone can affect all
subsequent phones in the line. Also,
all phones on the line share
bandwidth.
Moving a network connection from the phone
to a workstation
- If you are powering your phone
through the network connection,
you must be careful if you decide to
unplug the phone’s network
connection and plug the cable into
a desktop computer.
The computer’s network card
cannot receive power through the
network connection; if power comes
through the connection, the network
card can be destroyed. To prevent
this, follow the instructions of
manufacture of in-line power
provider.
Several seconds of being
disconnected may be required for
the device to recognize that there is
no longer a phone on the line, and
to stop providing power to the
cable.
Changing the telephone configuration
- Only an administrator should change
the phone configuration. Incorrectly
changing parameters will result in the
phone not Duplicate IP screen
- There may be another device on the
network with your phone’s IP
address. Change the IP address.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Teltronics Arcata 2826 CIP-D and is the answer not in the manual?

Teltronics Arcata 2826 CIP-D Specifications

General IconGeneral
BrandTeltronics
ModelArcata 2826 CIP-D
CategoryTelephone
LanguageEnglish

Related product manuals