28xx CIP-D User Guide 81
VIEWING PHONE SETTINGS
The Arcata 28xx CIP-D should be configured by
the system administrator during initial installation
and setup. The phone settings can be viewed at
any time as described in this chapter.
System information is viewed via LCD menus
which are accessed from the Main Menu LCD
screen. Note that you can only view this
information and cannot attempt to change any
of the settings. Contact your system administrator
if you need changes or have questions.
1. To view the settings for your phone, press the
Menu soft key. T
The Main Menu appears.
Main Menu LCD Screen
NOTE: The Modify Settings and the Erase Data
options are used by the system administrator only.
See RING TONES in Chapter 2 for details on
customizing the ring sound that a phone makes
when calls come in.
2. To view information about the system, scroll to
the System Information option, and press OK.
1. RING TONES
2. SYSTEM INFORMATION
3. MODIFY SETTINGS
4. LINE KEY LABELS
5. ERASE DATA
BACK
MAIN MENU
To Next Page
Loading...
Need help?
General
