Need help?Do you have a question about the Tenvis iprobot 3 and is the answer not in the manual?
Steps for installing the physical camera hardware.
Steps for installing necessary software.
Initial steps to configure the camera for wireless use.
Connecting the camera to a Wi-Fi network by SSID and password.
Preparing the camera for recording by inserting an SD card.
Choosing between continuous or alarm-triggered recording.
Configuring email alerts with snapshot pictures upon alarm.
Activating motion detection and setting sensitivity.
Process for creating a new TENVIS user account.
Steps to add the camera to the user account via UID.
Adding the camera manually using its UID and password.
Downloading and installing the necessary browser plugin.
Granting permission for the browser plugin to run.
Installing the software to search for cameras on Mac.
Finding cameras connected to the local network.
Accessing the camera via web browser with username and password.
Steps to reset the camera to factory settings using the reset button.
General| Resolution | 1280x720 (720P) |
|---|---|
| Night Vision | Yes |
| Motion Detection | Yes |
| Image Sensor | 1/4" CMOS |
| Lens | 3.6mm |
| Night Vision Range/IR Distance | Up to 10 meters |
| Connectivity | Wi-Fi (802.11b/g/n) |
| Storage | MicroSD card (up to 32GB) |
| Power Supply | 5V DC |
| Operating Humidity | 10% to 80% RH |
To Next Page
