Terex MAC 25 User Manual

MAC-25 FALL BLOCK LOAD CHART - 10 DEG. ART
.
LMI DUT
Y
101
COUNTERWEIGHT ON FRONT OF CRANE - SPRING LOCKOUTS ENGAGED
S.W.L. ARE BASED ON 66.7% STABILITY & STRENGTH
S.W.L IN KILOGRAMS FOR SLEW ANGLES OF 10 DEGREES OR LESS EITHER
- S.W.L. ABOVE BOLD RED LINE ARE STRUCTURAL
SIDE OF STRAIGHT AHEAD (INDICATED BY GREEN LED ON DASH).
S.W.L. ARE BASED ON FIRM LEVEL GROUND (1% SLOPE (0.6 DEG) AS PER AS1418.5)
BOOM ANGLE - UNDEFLECTED (REF.)
WITH TYRES INFLATED AS PER NOTES
NOTE :
VALUES IN BRACKETS ( ) ARE ACTUAL RADIUS AT ZERO DEG. BOOM ANGLE.
LIFT & CARRY - THE S.W.L. SHALL BE CARRIED WITH THE MINIMUM BOOM LENGTH & AS
CLOSE TO THE GROUND AS POSSIBLE AT SPEEDS NOT IN EXCESS OF 0.4 M/SEC (1.44 KM/HR)
Radius BOOM PIVOT TO HEAD SHEAVES - THIRD BOOM RETRACTED THIRD BOOM EXTENDING
in
(metres) (metres)
Metres 6.12 6.50 7.00 7.50 8.00 8.50 9.00 9.50 10.00 10.50 11.00 11.50 12.00 12.50 13.00 13.50 14.32 14.50 15.00 15.50 16.00 16.50 17.00 17.50 18.00 18.42
1.4
23900 23850 23750 23800 23800 23750 23750 23750
48 51 54 57 59 61 63 65
2.0
19950 19900 19850 19800 19750 19750 19700 19650 19650 19600 19300
WINCH S.W.L.
40 44 48 51 54 57 59 61 62 64 65 SINGLE PART 4200
2.5
15700 15650 15600 15600 15550 15500 15500 15450 15450 15400 15400 15350 14600 TWO PARTS 8400
32 37 42 46 50 52 55 57 59 61 62 63 65 FOUR PARTS 16800
3.0
12800 12800 12800 12750 12700 12700 12650 12650 12600 12600 12600 12550 12550 12550 12500 12250 SIX PARTS 25000
21 29 35 41 45 48 51 53 55 57 59 61 62 63 64 65
3.5
11050 10750 10750 10750 10700 10700 10650 10650 10600 10600 10600 10550 10550 10550 10500 10500 10500 10500
(3.4) 17 28 34 39 43 47 49 52 54 56 58 59 61 62 63 65 65
4.0
9750 9200 9200 9200 9150 9150 9150 9100 9100 9100 9050 9050 9050 9050 9000 9000 9000 9050 9100
(3.8) 17 27 33 38 42 45 48 51 53 55 56 58 59 61 62 63 64 65
5.0
8450 7400 7050 7050 7050 7000 7000 7000 6950 6950 6950 6950 6950 6900 6900 6900 6950 7000 7050 7100 7100 7150 7200
(4.3) (4.8) 16 25 31 36 40 43 46 48 50 52 54 56 58 58 59 61 62 63 63 64 65
6.0
6550 5850 5600 5600 5600 5600 5550 5550 5550 5550 5550 5500 5500 5500 5550 5600 5650 5700 5700 5750 5750 5800
(5.3) (5.8) 15 24 30 34 38 41 44 46 48 50 53 53 55 56 57 58 60 61 61 62
7.0
5250 4750 4550 4550 4550 4550 4550 4550 4550 4500 4500 4500 4550 4600 4650 4650 4700 4750 4750 4800
(6.3) (6.8) 14 23 28 33 36 39 42 44 48 48 50 52 53 54 56 57 58 59
8.0
4300 3900 3800 3800 3800 3800 3750 3750 3750 3750 3800 3850 3900 3900 3950 4000 4000 4050
(7.3) (7.8) 14 22 27 31 35 38 42 43 45 47 48 50 51 53 54 55
9.0
3600 3300 3200 3200 3200 3200 3150 3200 3250 3250 3300 3350 3350 3400 3400 3450
(8.3) (8.8) 13 21 26 30 35 36 39 41 43 45 47 48 50 51
10
3000 2800 2700 2700 2700 2700 2750 2800 2850 2850 2900 2900 2950 2950
(9.3) (9.8) 12 20 28 29 32 35 38 40 42 44 45 47
11
2550 2350 2300 2350 2350 2400 2450 2450 2500 2550 2550 2600
(10.3) (10.8) 17 19 24 28 31 34 37 39 41 42
12
NOTE : WEIGHT OF HOOKS, BLOCKS & OTHER 2100 2050 2050 2100 2100 2150 2200 2200 2250 2250
LOAD HANDLING DEVICES SHALL BE ADDED (11.6) (11.8) 12 19 23 27 30 33 36 37
13
TO THE WEIGHT OF THE LOAD 1950 1850 1850 1850 1900 1950 1950 2000
(12.3) (12.8) 11 18 23 27 30 32
14
1750 1650 1650 1700 1700 1750
(13.3) (13.8) 11 18 22 25
15
1600 1500 1500 1550
(14.3) (14.8) 11 16
15.71
1450 1400
(15.3) (15.7)
16/66 MXC1347B COUNTERWEIGHT - FRONT MAC 25 FALL BLOCK - 10 DEG

Terex MAC 25 Specifications

General

Brand	Terex
Model	MAC 25
Category	Construction Equipment
Language	English