Terex MAC 25 User Manual

MAC-25 FALL BLOCK LOAD CHART - 40 DEG. ART
.
LMI DUT
Y
101
COUNTERWEIGHT ON FRONT OF CRANE - SPRING LOCKOUTS ENGAGED S.W.L. ARE BASED ON 66.7% STABILITY & STRENGTH
S.W.L IN KILOGRAMS FOR SLEW ANGLES OF GREATER THAN 10 DEGREES UP TO 40
- S.W.L. ABOVE BOLD RED LINE ARE STRUCTURAL
DEGREES EITHER SIDE OF STRAIGHT AHEAD (INDICATED BY RED LED ON DASH).
S.W.L. ARE BASED ON FIRM LEVEL GROUND (1% SLOPE (0.6 DEG) AS PER AS1418.5)
BOOM ANGLE - UNDEFLECTED (REF.)
WITH TYRES INFLATED AS PER NOTES
NOTE :
VALUES IN BRACKETS ( ) ARE ACTUAL RADIUS AT ZERO DEG. BOOM ANGLE.
LIFT & CARRY - THE S.W.L. SHALL BE CARRIED WITH THE MINIMUM BOOM LENGTH & AS
CLOSE TO THE GROUND AS POSSIBLE AT SPEEDS NOT IN EXCESS OF 0.4 M/SEC (1.44 KM/HR)
Radius BOOM PIVOT TO HEAD SHEAVES - THIRD BOOM RETRACTED THIRD BOOM EXTENDING
in
(metres) (metres)
Metres 6.12 6.50 7.00 7.50 8.00 8.50 9.00 9.50 10.00 10.50 11.00 11.50 12.00 12.50 13.00 13.50 14.32 14.50 15.00 15.50 16.00 16.50 17.00 17.50 18.00 18.42
1.4
23750 22450 20950 19200 17750 16600 15600 14750
48 51 54 57 59 61 63 65
2.0
17850 17850 17800 16850 15950 15150 14500 13750 13000 12350 11750
WINCH S.W.L.
40 44 48 51 54 57 59 61 62 64 65 SINGLE PART 4200
2.5
14000 14000 13950 13900 13900 13400 12800 12300 11800 11400 10950 10500 10050 TWO PARTS 8400
32 37 42 46 50 52 55 57 59 61 62 63 65 FOUR PARTS 16800
3.0
11450 11400 11400 11350 11350 11300 11300 10950 10550 10150 9800 9500 9200 8950 8600 8300 SIX PARTS 25000
21 29 35 41 45 48 51 53 55 57 59 61 62 63 64 65
3.5
9800 9550 9550 9550 9500 9500 9450 9450 9450 9150 8850 8550 8300 8050 7850 7650 7300 7250
(3.4) 17 28 34 39 43 47 49 52 54 56 58 59 61 62 63 65 65
4.0
8650 8150 8150 8150 8150 8100 8100 8050 8050 8000 7750 7550 7350 7150 6950 6650 6650 6500 6400
(3.8) 17 27 33 38 42 45 48 51 53 55 56 58 59 61 62 63 64 65
5.0
7450 6500 6200 6200 6200 6200 6150 6150 6150 6150 6100 6100 6000 5800 5600 5550 5500 5400 5350 5300 5200 5150 5100
(4.3) (4.8) 16 25 31 36 40 43 46 48 50 52 54 56 58 58 59 61 62 63 63 64 65
6.0
5750 5100 4900 4900 4900 4900 4850 4850 4850 4850 4850 4850 4750 4750 4700 4650 4600 4550 4500 4450 4400 4350
(5.3) (5.8) 15 24 30 34 38 41 44 46 48 50 53 53 55 56 57 58 60 61 61 62
7.0
4600 4100 3950 3950 3950 3950 3950 3950 3950 3950 3900 3950 3950 4000 4000 3950 3900 3850 3850 3800
(6.3) (6.8) 14 23 28 33 36 39 42 44 48 48 50 52 53 54 56 57 58 59
8.0
3700 3400 3250 3250 3250 3250 3250 3250 3250 3250 3300 3350 3350 3400 3450 3400 3350 3350
(7.3) (7.8) 14 22 27 31 35 38 42 43 45 47 48 50 51 53 54 55
9.0
3100 2800 2700 2700 2700 2700 2700 2700 2750 2800 2850 2850 2900 2950 2950 2950
(8.3) (8.8) 13 21 26 30 35 36 39 41 43 45 47 48 50 51
10
2550 2350 2300 2300 2300 2300 2350 2400 2400 2450 2450 2500 2550 2550
(9.3) (9.8) 12 20 28 29 32 35 38 40 42 44 45 47
11
2150 2000 1950 1950 2000 2050 2050 2100 2100 2150 2200 2200
(10.3) (10.8) 17 19 24 28 31 34 37 39 41 42
12
NOTE : WEIGHT OF HOOKS, BLOCKS & OTHER 1750 1700 1700 1750 1750 1800 1850 1850 1900 1900
LOAD HANDLING DEVICES SHALL BE ADDED (11.6) (11.8) 12 19 23 27 30 33 36 37
13
TO THE WEIGHT OF THE LOAD 1600 1500 1500 1550 1600 1600 1650 1650
(12.3) (12.8) 11 18 23 27 30 32
14
1450 1350 1350 1400 1400 1450
(13.3) (13.8) 11 18 22 25
15
1300 1250 1250 1250
(14.3) (14.8) 11 16
15.71
1150 1100
(15.3) (15.7)
17/66 MXC1347B COUNTERWEIGHT - FRONT MAC 25 FALL BLOCK - 40 DEG

Terex MAC 25 Specifications

General

Brand	Terex
Model	MAC 25
Category	Construction Equipment
Language	English