Terex MAC 25 User Manual

MAC-25 OFFSET HEAD BOTTOM POSITION LOAD CHART - 40 DE
G
LMI DUT
Y
103
COUNTERWEIGHT ON FRONT OF CRANE - SPRING LOCKOUTS ENGAGED
S.W.L. ARE BASED ON 66.7% STABILITY & STRENGTH
S.W.L IN KILOGRAMS FOR SLEW ANGLES OF GREATER THAN 10 DEGREES UP TO 40
- S.W.L. ABOVE BOLD RED LINE ARE STRUCTURAL
DEGREES EITHER SIDE OF STRAIGHT AHEAD (INDICATED BY RED LED ON DASH).
S.W.L. ARE BASED ON FIRM LEVEL GROUND (1% SLOPE (0.6 DEG) AS PER AS1418.5)
BOOM ANGLE - UNDEFLECTED (REF.)
WITH TYRES INFLATED AS PER NOTES
NOTE :
VALUES IN BRACKETS ( ) ARE ACTUAL RADIUS AT ZERO DEG. BOOM ANGLE.
LIFT & CARRY - THE S.W.L. SHALL BE CARRIED WITH THE MINIMUM BOOM LENGTH & AS
CLOSE TO THE GROUND AS POSSIBLE AT SPEEDS NOT IN EXCESS OF 0.4 M/SEC (1.44 KM/HR)
Radius BOOM PIVOT TO EDGE OF SHEAVE - THIRD BOOM RETRACTED THIRD BOOM EXTENDING
in
(metres) (metres)
Metres 6.86 7.00 7.50 8.00 8.50 9.00 9.50 10.00 10.50 11.00 11.50 12.00 12.50 13.00 13.50 14.00 14.50 15.06 15.50 16.00 16.50 17.00 17.50 18.00 18.50 19.16
1.4
8400 8400 8400 8400 8400 8400
55 56 59 61 63 65
2.0
8400 8400 8400 8400 8400 8400 8400 8400 8400
WINCH S.W.L.
49 50 53 56 58 60 62 64 65 SINGLE PART 4200
2.5
8400 8400 8400 8400 8400 8400 8400 8400 8400 8400 8400 TWO PARTS 8400
43 44 48 51 54 56 58 60 62 63 65
3.0
8400 8400 8400 8400 8400 8400 8400 8400 8400 8400 8400 8400 8400 8400
36 38 43 46 50 52 55 57 59 60 62 63 64 65
3.5
8400 8400 8400 8400 8400 8400 8400 8400 8400 8400 8400 8400 8250 8050 7850 7600
27 30 36 41 45 48 51 53 55 57 59 60 62 63 64 65
4.0
8050 8400 8400 8400 8400 8400 8350 8350 8300 8250 8000 7750 7500 7300 7100 6950 6750 6600
(4.2) 19 29 35 40 44 47 50 52 54 56 58 59 60 62 63 64 65
5.0
7750 6750 6450 6450 6450 6400 6400 6350 6350 6350 6300 6300 6150 6000 5850 5700 5550 5500 5400 5350 5250 5200
(4.3) (4.8) 18 27 33 38 41 44 47 49 52 53 55 57 58 59 61 61 62 63 64 65
6.0
5950 5300 5100 5100 5100 5050 5050 5050 5050 5000 5000 5000 5000 4850 4750 4700 4650 4600 4550 4500 4450 4400 4300
(5.3) (5.8) 16 25 31 36 39 42 45 47 49 51 53 54 56 57 58 59 60 61 62 63 64
7.0
4750 4300 4150 4150 4150 4100 4100 4100 4100 4050 4050 4050 4050 4050 4050 4000 3950 3900 3850 3850 3800
(6.3) (6.8) 16 24 30 34 37 40 43 45 47 49 51 52 54 55 56 57 59 59 61
8.0
3900 3500 3400 3400 3400 3400 3400 3400 3350 3350 3350 3400 3400 3450 3450 3450 3400 3400 3350
(7.3) (7.8) 15 23 28 33 36 39 41 44 46 48 49 51 52 53 55 56 57
9.0
3200 2950 2850 2850 2850 2850 2850 2800 2800 2850 2900 2900 2950 2950 3000 3000 2950
(8.3) (8.8) 14 22 27 31 35 37 40 42 44 46 48 49 51 52 53
10
2700 2450 2400 2400 2400 2400 2400 2400 2450 2500 2500 2550 2550 2600 2600
(9.3) (9.8) 14 21 26 30 34 36 39 41 43 45 46 48 50
11
2250 2100 2050 2050 2050 2050 2100 2150 2150 2200 2200 2250 2250
(10.3) (10.8) 13 20 26 29 32 35 37 40 42 43 45
12
NOTE : WEIGHT OF HOOKS, BLOCKS & OTHER 1900 1750 1700 1750 1800 1850 1850 1900 1900 1950 1950
LOAD HANDLING DEVICES SHALL BE ADDED (11.3) (11.8) 14 20 24 28 31 34 36 39 41
13
TO THE WEIGHT OF THE LOAD 1600 1550 1550 1550 1600 1650 1650 1700 1700
(12.4) (12.8) 12 19 24 27 30 33 36
14
1450 1350 1400 1400 1450 1450 1500
(13.3) (13.8) 12 18 23 27 30
15
1300 1250 1250 1250 1300
(14.3) (14.8) 12 18 24
16.4
1200 1100 1050
(15.3) (15.8) (16.4)
21/66 MXC1347B COUNTERWEIGHT - FRONT MAC 25 OFFSET HEAD BOTTOM POSITION - 40 DEG

Terex MAC 25 Specifications

General

Brand	Terex
Model	MAC 25
Category	Construction Equipment
Language	English