Terex MAC 25 - Mac-25 Offset Head Top Position Load Chart - 40 Deg

MAC-25 OFFSET HEAD TOP POSITION LOAD CHART - 40 DE
G
LMI DUT
Y
104
COUNTERWEIGHT ON FRONT OF CRANE - SPRING LOCKOUTS ENGAGED
S.W.L. ARE BASED ON 66.7% STABILITY & STRENGTH
S.W.L IN KILOGRAMS FOR SLEW ANGLES OF GREATER THAN 10 DEGREES UP TO 40
- S.W.L. ABOVE BOLD RED LINE ARE STRUCTURAL
DEGREES EITHER SIDE OF STRAIGHT AHEAD (INDICATED BY RED LED ON DASH).
S.W.L. ARE BASED ON FIRM LEVEL GROUND (1% SLOPE (0.6 DEG) AS PER AS1418.5)
BOOM ANGLE - UNDEFLECTED (REF.)
WITH TYRES INFLATED AS PER NOTES
NOTE :
VALUES IN BRACKETS ( ) ARE ACTUAL RADIUS AT ZERO DEG. BOOM ANGLE.
LIFT & CARRY - THE S.W.L. SHALL BE CARRIED WITH THE MINIMUM BOOM LENGTH & AS
CLOSE TO THE GROUND AS POSSIBLE AT SPEEDS NOT IN EXCESS OF 0.4 M/SEC (1.44 KM/HR)
Radius BOOM PIVOT TO EDGE OF SHEAVE - THIRD BOOM RETRACTED THIRD BOOM EXTENDING
in
(metres) (metres)
Metres 6.82 7.00 7.50 8.00 8.50 9.00 9.50 10.00 10.50 11.00 11.50 12.00 12.50 13.00 13.50 14.00 14.50 15.02 15.50 16.00 16.50 17.00 17.50 18.00 18.50 19.12
1.4
8400 8400 8400 8400 8400 8400 8400
52 53 56 58 60 62 64
2.0
8400 8400 8400 8400 8400 8400 8400 8400 8400 8400
WINCH S.W.L.
45 47 50 53 56 58 60 61 63 64 SINGLE PART 4200
2.5
8400 8400 8400 8400 8400 8400 8400 8400 8400 8400 8400 8400 TWO PARTS 8400
39 41 45 49 52 54 56 58 60 61 63 64
3.0
8400 8400 8400 8400 8400 8400 8400 8400 8400 8400 8400 8400 8400 8400 8400
32 34 40 44 47 50 53 55 57 58 60 61 63 64 65
3.5
8400 8400 8400 8400 8400 8400 8400 8400 8400 8400 8400 8400 8200 7950 7750 7550 7300
24 27 33 38 42 46 49 51 53 55 57 59 60 61 62 63 64
4.0
8150 8400 8400 8350 8350 8300 8250 8250 8200 8150 7900 7650 7450 7250 7050 6850 6700 6550 6450
(4.1) 16 26 32 37 41 45 47 50 52 54 56 57 59 60 61 62 63 64
5.0
7750 6750 6400 6400 6350 6350 6300 6300 6250 6250 6250 6200 6100 5900 5750 5650 5500 5400 5350 5300 5200 5150 5100
(4.3) (4.8) 15 24 30 35 39 42 45 48 50 52 53 55 56 58 59 60 61 62 63 64 65
6.0
5950 5300 5050 5050 5050 5000 5000 5000 4950 4950 4950 4900 4900 4800 4700 4650 4600 4550 4500 4450 4400 4350 4300
(5.3) (5.8) 14 23 29 34 37 40 43 46 48 50 51 53 54 56 57 58 59 60 61 62 63
7.0
4750 4250 4100 4100 4100 4050 4050 4050 4050 4000 4000 4000 4000 4000 4000 3950 3900 3850 3850 3800 3750
(6.3) (6.8) 14 22 28 32 36 39 41 44 46 48 50 51 53 54 55 56 57 58 59
8.0
3850 3500 3400 3400 3350 3350 3350 3350 3300 3300 3300 3350 3350 3400 3450 3400 3350 3350 3300
(7.3) (7.8) 13 21 27 31 34 37 40 42 44 46 48 49 51 52 53 55 56
9.0
3200 2900 2800 2800 2800 2800 2800 2800 2750 2800 2850 2850 2900 2950 2950 2950 2950
(8.3) (8.8) 12 20 25 30 33 36 39 41 43 45 46 48 49 51 52
10
2700 2450 2400 2350 2350 2350 2350 2400 2400 2450 2500 2500 2550 2550 2600
(9.3) (9.8) 12 19 25 29 32 35 37 40 42 43 45 47 48
11
2250 2050 2000 2000 2000 2050 2050 2100 2150 2150 2200 2200 2250
(10.3) (10.8) 12 19 24 28 31 34 36 38 40 42 44
12
NOTE : WEIGHT OF HOOKS, BLOCKS & OTHER 1900 1750 1700 1750 1750 1800 1850 1850 1900 1900 1950
LOAD HANDLING DEVICES SHALL BE ADDED (11.3) (11.8) 12 18 23 27 30 33 35 37 40
13
TO THE WEIGHT OF THE LOAD 1600 1550 1500 1550 1600 1600 1650 1650 1700
(12.3) (12.8) 11 18 22 26 29 32 35
14
1450 1350 1350 1400 1400 1450 1500
(13.3) (13.8) 11 17 22 25 29
15
1300 1250 1250 1250 1300
(14.3) (14.8) 10 17 22
16.45
1200 1100 1050
(15.3) (15.8) (16.5)
23/66 MXC1347B COUNTERWEIGHT - FRONT MAC 25 OFFSET HEAD TOP POSITION - 40 DEG