1-2
Introduction
1991
INTENDED USE OF MACHINE
This product and its approved attachments are primarily intended to be used as
described in this manual.
Use of this product in any other way is prohibited and contrary to its intended
use.
Hazard Classification
Multi-tier hazard classification system is used to communicate potential personal
injury hazards. The following signal words used with the safety alert symbol
indicate a specific level of severity of the potential hazard. Signal words used
without the safety alert symbol relate to property damage and protection only.
All are used as attention getting devices throughout this handbook as well as on
decals and labels fixed to the machinery to assist in potential hazard
recognition and prevention.
DANGER indicates an imminently hazardous situation which, if not avoided, will
result in death or serious injury.
WARNING indicates a potentially hazardous situation which, if not avoided,
could result in death or serious injury.
CAUTION indicates a potentially hazardous situation which, if not avoided, may
result in minor or moderate injury.
CAUTION used without the safety alert symbol indicates a potentially hazardous
situation which, if not avoided, may result in property damage.
Machine Identification
While reading this handbook you will notice references to controls and equipment
which may not be found on all machines. It is important that you know your
machine and its equipment and how to operate it properly.
Information regarding the machine model, code and chassis serial number is
found on the unit serial number plate on the rear right of the front frame. The
machine model and serial number should always be referenced in any
correspondence with your dealer or factory.
DANGER
WARNING
CAUTION
CAUTION
To Next Page
Loading...
Need help?
General
