4-8
Operating the Truck
STARTING THE ENGINE
Attention to the warning lights and instruments when starting the engine, and
operating, will help the operator monitor the machine systems and components.
1. Make sure the parking/emergency brake control is in the 'PARK' position.
2. Insert switch key and turn clockwise to position '1'.
3. Make sure the body control lever is in the 'FLOAT' position.
4. Make sure the transmission shift selector is in the 'NEUTRAL' position.
5. Press horn control to sound horn.
NOTICE
Always sound horn before starting engine or operating any control.
6. Turn key switch to position '2' to switch on the ignition. Press warning light
test switch to test operation of warning lights.
7. Turn key further clockwise against spring pressure to position '3' to initiate the
0
1
3
1044
052
2
1106
1
0
1
2
314
1485
5
4
1045
6
N
R
1
R
2
D
1
2
3
4
5
MODE
To Next Page
Loading...
