4-14
Operating the Truck
6. To stop the machine release the accelerator and depress the service
brake pedal. Release the service brake as the machine slows until,
when stopped, the pedal is depressed just enough to hold the machine
stationary.
7. When the machine has stopped, shift the transmission to Neutral,
apply the parking brake and release the service brake.
8. If the service brake does not stop the machine. Apply the parking/
emergency brake. This should only be applied to stop the machine in an
emergency.
There is no mechanical connection between the engine and wheels
on machines with converter transmissions. The parking brake must
always be applied when the engine is switched off.
STOPPING THE ENGINE
1. Make sure the parking/emergency brake control is in the 'PARK'
position.
2. Make sure the transmission is in 'NEUTRAL'.
6
276
277
7
8
1106
1485
2
1106
1
N
R
1
R
2
D
1
2
3
4
5
MODE
To Next Page
Loading...
