Terex TR100 User Manual

4-3
Operating the Truck
OPERATING THE TRUCK
Pre-Starting Inspection
* Make sure all safety signs are free of damage, and are fully
readable, replace as necessary.
* Before the engine is started ensure the machine is ready for operation.
* The machine should be in a level position to permit accurate checking of
fluid quantities in the engine and other components.
* Make sure parking brake is applied and block wheels securely to prevent
accidental movement of the machine while checking component levels.
* Test all lights, warning signals, controls and instruments for proper
operation.
* Walk around the machine and carry out the Inspections and Component
Checks described in the drawing and on the following pages.
2125
ENGINE
Check oil level. Check for
leaks.
FRONT RIDE CYLINDERS
Check for debris, leaks and
damage.
WHEELS AND TYRES
Check condition, inflation,
nuts and for damaged rims.
RADIATOR HEADER TANK
Check coolant level.
STEERING CYLINDERS
Check for debris, leaks and
damage. Check lines
for wear and leaks.
FUEL TANK
Check fuel level. Ensure fuel
tank is full.
BODY CYLINDERS
Check for debris, leaks and
damage. Check lines for
wear and leaks.
DIFFERENTIAL
Check for leaks.
REAR RIDE CYLINDERS
Check for debris, leaks and
damage.
RADIATOR AND COOLING
LINES
Check for leaks.
CAB, PLATFORM AND STEPS
Check for cleanliness. Check
seat belts.
BRAKE ACCUMULATORS
Check for leaks.
TRANSMISSION
Check oil level. Check
for leaks.
STEERING ACCUMULATOR
Check for leaks.
STEERING AND
BRAKING TANK
Check oil level. Check for
leaks.
BODY AND DISC
BRAKE COOLING TANK
Check oil level. Check for
leaks.
WHEEL PLANETARIES
Check for leaks.
DISC BRAKE ASSEMBLIES
Check for leaks.

Terex TR100 Specifications

General

Brand	Terex
Model	TR100
Category	Trucks
Language	English