2-11
Safety
* Always use a self-attaching chuck with a long airline, and, stand to one
side while the tyre is inflating. Refer to Section 160-0050, WHEEL RIM AND TYRE
in the Maintenance Manual.
* Ensure any lifting devices are adequate for the job which they are intended.
Scrapping the Machine
At the end of its life, the machine should be disassembled by a
competent person using safe working prctices, wearing the
appropriate Personal Protective equipment and working in accordance with
local regulations.
The appropriate lifting equipment, chocks and stands must be used to
maintain a stable machine as components are removed and the machines
centre of mass changes. Fluids must be drained off into suitable containers
and if possible recycled orotherwise disposed of an enviromentally friendly in
accordance with local regulations.
Care must be taken when dealing with flammable liquids and the
machine parts that contained those liquids. Any process that could
ignite flammable materials must not be used on components that
have contained flammable liquids in them or have residual
flammable liquids on them.
Fire extinguishers must be readily available if cutting/welding
equipment is to be used.
When possible recyclable materials should be seperated out and
processed in accordance with local regulations using an authorised agent.
To Next Page
Loading...
