2-12
Safety
Installation and Adjustment of Mirrors and CCTV
The operator must survey their surroundings before entering the machine, and check their field of
vision prior to and during operation of the machine. All mirrors must be adjusted when installed, and
prior to operating the machine, to achieve optimum visibility and thus minimize the risk of injury to
themself and others. Site management should utilize appropriate jobsite organization to minimize
hazards due to restricted visibility. Modifications made to to the machine may restrict the visibility
and compromise compliance with safety standards (ISO 5006:2006).
2061
1
2060
Ensure that all mirrors are installed and adjusted to optimize operator
visibility. All mirrors are capable of adjustment in a similar fashion, by
undoing their attachment bolts, manually repositioning them to the
desired angle then retightening their attachment bolts. The three
mirrors illustrated above (fitted to brackets mounted on the handrails),
and to the right of this text (mounted on the top-right-hand corner of
the radiator guard), are supplied loose and adjusted using the same
method.
1
3
2
To Next Page
Loading...
