2. Store Manual data to memory :
Press MEMORY key one time store one sets displayed data to memory, the M
annunciator display one time and the stored memory address will be
displayed.
Maximum store memory capacity size is 99 sets.
3. Read the manual stored data :
Press READ key to enter the read mode, the R annunciator is displayed.
Press key to read the memories data, the memories data address will be
displayed.
Press “ ” key to exit the read mode.
5-8 Auto Datalogging Function Operation
1. Clear memory data :
Please refer to software manual (CD-ROM), use PC to clear memories data, the
meter can not clear memories data free from lost memories data.
2. Store Auto datalogging data to memory :
Setting the current time and Auto datalogging interval time.
Press SET key to enter current time setting mode.
Press keys to set actual current YEAR-month, DAY-hour,
minute-second.
Press key to enter auto datalogging interval time setting, the “INTV”
annunciator is displayed.
Press keys cycle select the interval time, you can select 5 seconds, 30
seconds, 1 minute or 2 minutes.
Press key to exit TIME setting mode.
Enter Auto datalogging mode.
Press START key to start Auto data logging, the DATA M will be displayed,
the M annunciator, according to the interval time disappear one time store one
sets data into the memory.
Press STOP key to stop data record, press START key will resume data record,
but maximum can be divide to 10 memory blocks, only 12,000 sets data can be
stored in one block, the current block number will be displayed, total maximum
record capacity size is 20,000 sets data.
When maximum block or maximum capacity is full, the “FF” annunciator
will be displayed, the data record is auto stopped.
Download data to PC
Please refer to the software manual (CD-ROM) to download the data.
Shop for Data Logging products online at: www.DataLoggerStore.ca 1.877.766.5412
To Next Page
Loading...
